Material used
FR4 – CEM1 (only single side) – CEM3 – Laminates HTC (High Thermal Conductivity)
Polymide (e/o Kapton) -Teflon – FR4 Tg 150-180-200
Laminates con CTI>250 (PLC<3) – FR4 low Er (for RF) – FR4 ceramics
Laminates Halogen Free – FR4 high ductility (semiflex)

Thickness of base laminate (including copper when> 0.8mm)
0.1mm – 0.2mm – 0.3mm – 0.4mm – 0,6mm – 0.8mm – 1.0mm – 1.2mm – 1.6mm – 2.0mm – 2.4mm – 3.2 mm

Thickness of base copper

18um – 35um – 70um – 105um – 140um – 170um – 210um

Surface Finishes

Passivated Copper – Hot Air Levelling Lead Free or Sn/Pb
Immersion Gold (ENIG – ENIPIG – ASIG) – Electrolytic gold
Immersion Silver – Immersion Tin

Go check Single and Double Layer PCB in our online shop>>

Single and Double Layer PCB - Alba PCB Group

Solder Resist

  • Definizion: Photographic (collimated light or laser direct imaging) – serigraphy ( occlusion holes)
  • Methodology of drafting: Silk Screen or Spray
  • Typical hardness : 6H
COLORS

Green, blue, red, white, black, transparent, some available in matte and glossy version.

Silk Screen

  • Methodology of drafting: Silk Screen or InkJet (only white)
  • Definizion: Serigraphy, Photographic, inkjet Pixel (720×720)
COLORS

White, Black, Blue, Yellow, Red.

Mechanical finish

FINISH OF THE BOARD
  • Single PCB
  • Panel PCB
  • Panel PCB with tap
  • Panel PCB with V-Scoring precuts
  • Mixed technology (Drilling and V-Scoring)

Opzional

WORK PROCESSES
  • Graphite printing (for sliding or membrane contacts)
  • Peelable solder resist printing
  • Print HTC insulating resins (epoxy and / or silicone)
  • Kapton taping
  • Controlled height machining: Drilling, Milling, Chamfering, Countersink, Boring
  • Occlusion holes (with solder resist or epoxy resins)

Laminates

  • FR4 Standard
  • FR4 medium / high / very highTG
  • Lead Free Epoxy material
  • Material (also fr4) low Er (high signal speed)
  • Material (also fr4) low Lf (low signal loss)
  • Polymide
  • Ptfe
  • Special Material ( with filler Teflon or Ceramic)
  • Flexible Material (Du Pont, Krempel) or semi-flexible (Isola)
  • Halogen Free
  • Coverlay
  • IMS
  • CEM1 (only single side)
  • CEM3
  • HTC Material (high thermal conductivity) for alta dissipazione
  • High CTI Material (max 600V)