PRODUCTS

IMS

MATERIALS USED
IMS (Insulated Metallic Substrate)

TYPE OF USED SUBSTRATES
Aluminum – Copper

PRODUCERS
Berquist – Ventec – KL Laminates – Aismalibar

PCB TYPE
Single-face – Double-face – Multi-layer

METAL THICKNESS
1.0 – 1.5 – 2.0 – 3.0 mm

INSULATING THICKNESS
0.1 – 0.2 – 0.25mm

THERMAL COEFFICIENT (standard)
0.8 – 1.0 – 1.2 – 1.4 – 2.0 W/m°K

COPPER BASE THICKNESS
18um – 35um – 70um – 105um – 140um – 170um – 200um

SURFACE FINISHINGS
Organic Solderability Preservative on copper –Lead Free HAL or Sn/Pb – Electrolytic Gilding – Chemical Gilding (ENIG – ENIPIG – ASIG) – Chemical Silver (Immersion or Electroless) or Tin ( Immersion)


Laminates

• IMS (alluminium base)
• IMS (copper base)

solder resist

• LPI inks (photographic)
• Epoxy inks (silkscreen printing)
• Flexible inks (for PCB flex, rigid flex and semi-flex)
• Definition: Photographic (collimated light or direct laser imaging) – Silkscreen printing (hole occlusion)
• Spreading methods: Silkscreen printing or Spray
• Typical hardness: 6H

COLOURS: Green, blue, red, white, black, yellow, grey and transparent.
*some are available in matte and glazed versions

silk screen

Spreading methods: Silkscreen printing or Ink Jet (only white)
Definition: Silkscreened printing, Photographic, inkjet Pixel (720×720)

COLOURS: White, Black, Blue, Yellow, Red and Grey

Mechanical finishing

FINISHING TYPES CARD:
• Single PCBs
• Panel-type PCBs
• Panel-type PCBs with indicators
• Electrical panel with pre-cut V-scoring
• Mixed technology (Milling and V-scoring)

Optionals

PROCESSING:
• Resistive Graphite printing (for sliding contacts)
• Conductive Graphite printing (for membrane contacts)
• Peel-off solder resist mask printing
• HTC insulating resin (epoxy and/or silicone) printing
• Kapton wrapping tape
• Controlled height machining: Drilling, Milling, Bevelling, V-shape flaring, Boring